IT IS POSSIBLE TO OBTAIN VERY SMOOTHED SURFACES
The diamond Burnishing Tools completed within a selected diamond stem are suitable
For carrying out the burnishing of turning or grinding surfaces on a lot of metals for
Obtaining a high level in finishing, from 0.05 to 0.20 pm, It is possible to burnish cast
iron obtaining a surface finishing rate of 0, 22 + 0, 42 pm.
REDUCED DIMENSIONS FOR VERY SMALL WORKING SPACES
The diamond Burnishing Tools have been studied with reduced dimensions with a shank having a section of 20 mm; thanks to this matter they are the ideal Tools for being used on small lathes too.
SIMPLES TO BE USED
The diamond Burnishing Tools have being used on traditional lathes and CNC lathes. After having installed the Burnishing Tool on the Tool-holder, the Tool place so that the diamond gets in touch on the middle of the part, obtaining an angle of 90 respects to the surface to burnish. The Tools must be used for the burnishing of linear surfaces. The Tool gets in touch with the surface to be burnish, the spring has put under pressure; the feed begins with a speed of 0,07 + 0,1 mm per turn, with a number of revolutions of the part similar to that used for the turning.
CHEAP ! SUITABLE FOR ALL THE WORKSHOPS
The diamond Burnishing Tools completed within a selected diamond stem are suitable
For carrying out the burnishing of turning or grinding surfaces on a lot of metals for
Obtaining a high level in finishing, from 0.05 to 0.20 pm, It is possible to burnish cast
iron obtaining a surface finishing rate of 0, 22 + 0, 42 pm.